The basics required to turn a factory rifle into a Semi-Custom
Rifle
Action / Bolt:
Based on a Customer supplied Rifle Action:
Howa 1500, Remington 700 or Tikka T3
Re-Machining ( Commonly known as Blueprinting) of:
Trigger:
Tune, Hone, Polish and adjust
Barrel:
Brand New Lothar Walther
Custom Made Stainless, Select Match Grade Rifle Barrel
Tempered and lapped, length up to 26“
Including
Stock - Bedding:
Proffesional Stock bedding, using Devcon and Alloy Pillars in original
stock
Coating:
Action and Bolt coated with Milspec Gunkote
Complete price for Semi-Custom Tune | 1350,- |
Remington 700 requires a larger recoil lug | 35,- |
Barrel Length longer than 26“. Up to 28“ per 1“ | 20,- |
Muzzle Thread for Suppressor or Muzzle Break | 85,- |
Other Action Types | POA |
Action Re-Machine / Blueprint | 225,- |
Fit a Roedale-Tactical-SSG Bolt Knob (incl Knob) | 60,- |
Modifify Remington 700 bolt handle (nessecary when fitting SSG Knob) | 15,- |
Enlarge Bolt Face for larger cases | 75,- |
Custom Made Bolt for Remington 700 (incl. Fitting. Original Bolt taken in exchange) |
230,- |
Helical Fluting (incl, return postage within Europe) | 80,- |
Tune, Hone, Polish and Adjust Remington 700, , Savage, Winchester, etc to a safe pull weight of approx. 1000g |
75,- |
Howa, Sako or Tikka -Trigger Matchtuning to. 500g |
75,- |
Brand New Lothar Walther Custom Made Stainless, Select Match Grade Lapped Rifle Barrel <26“ Threaded, Chambered Fitted and Proofed |
750,- |
Barrel Fluted (3, 6 or 9 Straight Flutes) | 185,- |
Barrel Fluted (3, 6 oder 9 Helical Flutes) | 275,- |
Muzzle Thread on new barrel supplied by us | 75,- |
Muzzle thread on customer barrel | 150,- |
Fitting of open sights | POA |
Re-Cut Muzzle Crown (Match / 11° / 90°) | 25,- |
Shorten Barrel (incl. Re-Crown) | From 75,- |
Proof | 110,- |
Action bead blasted (only Stainless) | 30,- |
Barrel bead blasted (only Stainless) | 30,- |
Gunkote (1-Colour) Action |
100,- |
Barreled Action | 175,- |
Camo with more colours | 2-colour +25% |
3-colour +50% |
Bolt | 85,- |
Action (incl. Bolt, bolt stop, firingpin shroud etc, but with out magazine box and floor plate) | From 295,- |
Barrel (Costing depends on the length and profile / surface area) | From 225,- |
Complete Rifle | 595,- |
Bedding with Aloy-Pillars and Devcon) | 160,- |
Full Devcon Skim-Bedding (Done on stocks with Aloy-Blocks) | 115,- |
2-Point Devcon Skim-Bedding (Done on stocks with Aloy-Blocks) | 80,- |
Mill stock for Magazine system (Roedale - Badger-HS, etc) | 55,- |
Mount Scope incl. Glueing scope in rings and Bedding the base / bases |
30,- |
Conversion from 6/48 to 8/40 scope mounting holes, or re-machining factory mis-aligned mounting holes | 30,- |
Zeroing ( Customer Supplied Ammo) | 60,- |
Manufacture of a Balistics Table (Laminated in Plasic) | 40,- |