Remington 700 RCS II

The RCS II R700 is a highly functional chassis type stock for the Remington 700 Bolt Action Rifle. Right and Left handed models are available to suit right and left handed Remington 700 Rifles, the difference between left and right handed stocks bieng simply the position of the bolt handle block and the access points to the cheek adjustment screws. The stock its self is ambidextrous in use in that it can be shot from the right or left shoulder irrelevant of bieng a left or right handed version.This offers a true ambidextrous capability.  It is also possible to convert the chassis from right to left handed or left to right handed with a minimum of additional parts.  The RCS II R700 is available to suit the short and long action types.

• Short action:  .223Rem to .308Win/WSM
• Long action: 6.5x55 to .338 Lap Mag

Chassis:

• Material: Aircraft grade Aluminium - machined from a solid billet.
• Finish: Hard Anodised
• Bedding: Alloy chassis ensures consistent contact between action and stock.
• Accepts all commonly found custom recoil lugs without machining requirement
• Short action chassis designed for 5 or 10 round AICS .308 type magazines (with or without front spacer plate found in some models of magazine )
• Long action chassis designed for 5rd AICS .300WM or .338Lap magazines
• Accepts any barrel contour up to 1.25” (31.75mm) straight cylinder.
• Accepts original remington 700 triggers ( including X Mark) as well as most after market triggers

Magazines:

Short action:

•  .308 Win and similar calibers use 5 or 10 rd AICS type magazines either with our without the spacer plate at the front of the magazine
• .308 AW magazines can be used with rifle actions that are machined to accept these.
• WSM and RSAUM calibers use 5 or 10 rd AICS type magazines either with our without the spacer plate at the front of the magazine. Mag capacity is 4rds or 8rds.
•  .223 Rem uses AICS plastic .223 magazines

Long Action:

• 6.5x55 - 30-06 etc use modified .300WM AICS magazines.  The mag lips require a simple modification to hold the cartridge correctly.
• Magnum calibers use .300WM AICS magazines
• .338 Lap uses AICS .338 Lap magazines

Side Pannels:

• Low Weight: ViperSkins are 4oz lighter than thumbhole AICS Skins.
• Wide Fore-end: Gives a stable shooting platform when shooting off barricades.
• Offhand Palmswell: Gives your offhand a proper grip your hand when shooting in any offhand position.
• Pistol grip: provides a grippy, non-slip, ergonomic hold. Puts your hand in the proper position to make accurate shots and keep the weapon under your control.
• Fast action thumb shelf gives you a positive index point for quick bolt manipulation and repeat shots.
• Ergonomic Rear Stock: Carefully tailored to accommodate any sized hand.
• Texture: The medium toothed texture has been designed to give a good grip in wet and dry environments.
• Material: A durable military grade polymer composite has just enough flex to resist hard impacts with a hardness to defend against scratching and chemical deterioration.

Cheekpiece:

• Adjustable for height
• Uses 2 side accessable screws to clamp/loosen.
• Cheekpiece removable for rifle cleaning purposes
• Cheekpiece can be moved forward and backward within mounting positions

Length of Pull:

• Adjustable via Spacer System
• Adjustable in 1cm and 2cm increments with spacers.
• LOP adjustment range varies slightly between versions but is roughly 12.6” to 15.4”.

Buttpad:

• Locks in with 2 set screws.
• Recoil absorbing.

Materials/Finishes:

• All aluminum parts hard anodized matt.
• Sling loops are matt stainless steel.
• Steel parts / screws are Mil-Spec salt bath nitrided.

Weight:

• Fixed version is about 4lbs 7oz w/o magazine.
• Folding version is about 4lbs 10oz w/o magazine.

Color:

• Black
• Military Green
• FDE-Sand
• Flecktan
• Pink

Mounting features for slings, monopods, etc:

• Front and rear sling loops on both sides
• 3-6 and 9 oclock mounting points for picatinny rails
• Buttstock includes bag rider/butthook which can be fitted with an optional picatinny rail on the underside for mounting of a monopod.
• Harris bipod stud can be fitted to 1 of 3 forend M5 threaded holes
• QD cups can be mounted in positions on sides of buttstock and forend.

Optional Accessories:

• Folding conversion kit
• Righthand - Lefthand conversion kit
• Spacers 1cm and 2cm
• Ventilated butt pad for heavy magnum calibers
• Picatinny rails
• QD sling mounts
• Night vision bridge mount
• Buttspike
• RH50 MKII Bipod
• Bipod Spigot

Availability:

See Webshop for Details