Tikka T3 RCS II
The RCS II T3 is a highly functional chassis
type stock for the Tikka T3 Bolt Action Rifle. Right and Left handed
models are available to suit right and left handed Tikka
T3 Rifles, the difference between left and right handed stocks bieng
simply the position of the bolt handle block and the access points to
the cheek adjustment screws. The stock its self is ambidextrous
in use in that it can be shot from the right or left shoulder irrelevant
of bieng a left or right handed version.This offers a true ambidextrous
capability. It is also possible to convert the chassis from
right to left handed or left to right handed with a minimum of additional
parts. The RCS II T3 is available to suit 2 groups of calibers
found in the factory Tikka T3 as well as any caliber in customised T3
rifles
- A: Short calibers: .223Rem to .308Win/WSM
- B: Long calibers: 6.5x55 to .338 Win Mag
Notes on the Tikka T3 Bolt Action Rifle. The
Tikka T3 rifle ranges in caliber from .222 Rem up to .338 Win Mag.
All these calibers and all models or T3 rifle are based around one
and the same action length. The only differences bieng the bolt face
diameter, the bolt stop and the internal dimentions of the factory
magazine. Irrelevant of caliber, all Tikka T3 rifle actions will fit
in the RCS II chassis. We offer however 2 different chassis which are
designated A: Short Caliber and B:
Long Caliber versions. The difference in the 2 chassis is the magazine
well, magazine latch and the magazine compatability
Chassis:
- Material: Aircraft grade Aluminium - machined from a solid billet.
- Finish: Hard Anodised
- Bedding: Alloy chassis ensures consistent contact between action
and stock.
- Integral Recoild Lug = No reqiurement for factory recoil lug found
on Tikka T3’s.
- Magazine compatability: A: AICS type including plastic
.223 mags. B: Voere type
- Accepts any barrel contour up to 1.25” (31.75mm) straight
cylinder.
- Accepts original T3 as well as after market triggers
Magazines:
A: Short caliber:
- .308 Win and similar calibers use 5 or 10 rd AICS
type magazines either with our without the spacer plate at the front
of the magazine
- WSM and RSAUM calibers use 5 or 10 rd AICS type magazines with
lips modified to suit. Either with our without the spacer plate
at the front of the magazine. Mag capacity is 4rds or 8rds.
- .223 AICS plastic magazines can also be used when slightly
modified. ( relieving outside of mag lips slighly to enable insertion
to right height in T3 action is a simple task)
B: Long Caliber:
- Voere Magazines: Standard 6.5x55 - 30-06. Magnum .300WM etc.
It is also possible to use the type B chassis with a short .308 magazine
from Voere or to feed calibers like the 6.5x284 from the standard magazine,
this makes the type B chassis very versatile in that it is possible
to use the type B chassis with any Tikka T3 from .243 Win up to .338WM
simply by employing an additional magazine.
Note:
- OEM plastic Tikka T3 magazines are not used with the Roedale
RCS II T3
Side Pannels:
- Low Weight: ViperSkins are 4oz lighter than thumbhole AICS Skins.
- Wide Fore-end: Gives a stable shooting platform when shooting off
barricades.
- Offhand Palmswell: Gives your offhand a proper grip your hand when
shooting in any offhand position.
- Pistol grip: provides a grippy, non-slip, ergonomic hold. Puts
your hand in the proper position to make accurate shots and keep the
weapon under your control.
- Fast action thumb shelf gives you a positive index point for quick
bolt manipulation and repeat shots.
- Ergonomic Rear Stock: Carefully tailored to accommodate any sized
hand.
- Texture: The medium toothed texture has been designed to give a good
grip in wet and dry environments.
- Material: A durable military grade polymer composite has just enough
flex to resist hard impacts with a hardness to defend against scratching
and chemical deterioration.
Optional Picatinny Rails: Allow universal mounting of forward IR illuminators,
lights, PEQ15s, sling mounts, NV devices or anything you might require
in the field
Note:
- It is possible to fit AI AICS side pannels to the RCS II chassis
with a minimum of modification
Cheekpiece:
- Adjustable for height
- Uses 2 side accessable hex head screws to clamp/loosen
- Upgrade to thumbwheel clamp screws is possible
- Cheekpiece removable for rifle cleaning purposes
- Cheekpiece can be moved left and right within mounting
positions
- Cheekpiece can be turned front to back to give alternate cheek weld
possition
Length of Pull:
- Adjustable via Spacer System
- Adjustable in 1cm and 2cm increments with spacers
- LOP adjustment range varies slightly between versions but is roughly
12.8” to 15.4”
Buttpad:
- Locks in with 2 set screws
- Recoil absorbing
- Ventilated buttpad available
Materials/Finishes:
- All aluminum parts hard anodized matt
- Sling loops are matt stainless steel
- Steel parts / screws are Mil-Spec salt bath nitrided
Weight:
- Fixed version is about 4lbs 7oz w/o magazine
- Folding version is about 4lbs 10oz w/o magazine
Color:
- Black
- Military Green
- FDE-Sand
- Fleck Cam
- Pink
Mounting features for slings, monopods, etc:
- Front and rear sling loops on both sides
- 3-6 and 9 oclock mounting points for picatinny rails
- Buttstock includes bag rider/butthook which can be fitted with
an optional picatinny rail on the underside for mounting of a
monopod
- Harris bipod stud can be fitted to 1 of the 3 forend M5 threaded
holes
- QD cups can be mounted in positions on sides of buttstock and forend
Optional Accessories:
- Folding conversion kit
- Righthand - Lefthand conversion kit
- Spacers 1cm and 2cm
- Ventilated butt pad for heavy magnum calibers
- Picatinny rails
- QD sling mounts
- Night vision bridge mount
- Buttspike
- RH50 MKII Bipod
- Bipod Spigot
Availability:
The RCS II type A is currently available in fixed version
for Tikka T3's in Short calibers. (Cal: .222/223 /.308 / WSM /
RSAUM etc)
The RCS II type B is currently available in fixed version
for Tikka T3's in Long calibers. (Cal: 6.5x55 / .30-06
/ .300WM / .338WM etc)
The folding version will be available by Autumn 2012
Fixed RCS II's can be easily converted to folding at a later date with
the fixed to folding conversion kit